H264_cutter causing sync problems for me

I'm using H264_cutter to cut the commericals out of my .TS files (by HD PVR). I don't have any problems using the software and everything seems fine. The cut .TS plays fine on the computer but i wanted to play it on my ps3. So when I mux the .TS into a m2ts file I get audio synch issues. It happens right after the first commerical cut, the audio is delayed by a few secs I tried demuxing the video & audio from the .TS file then remuxing it back to a m2ts file but same problem I tried muxing the .TS file without demuxing and same problem. The same file without the commerical edits is fine after being muxed into a m2ts file. what am i missing?

I'd suggest to demux video and audio with eac3to. Remux them back to ts with TSMuxer and cut this ts with TSMuxer again.

so I demuxed the original uncut .TS file with eac3to. During the demux i notice that the aac audio was listed as 131kps 48khz and -100ms, does the -100ms <--- mean the delay in audio? when I load the aac file into tsmuxer i notice that the audio delay is set to 0. Should i set that to -100ms?

Leave it as is.

so I demuxed the .TS file using eac3to and I ended up with a .h264 file and an .aac file. I tried to load the .h264 file into sony vegas and sony gives me an error. I tried loading into nero and error as well. I took the video & audio, remux it into a new .ts file using tsmuxer. The file plays fine with no synch issue. I cut the commericals out using h264_cutter and the resulting .ts file plays fine. Now I use txmuxer to change the ts file into a m2ts and the end file has an audio synch problem...:mad: I don't know what's going on, if I mux and don't cut the .ts file, the resulting m2ts file is fine. If I do cut and then mux i get audio synch problems. if I just cut the .ts file and do not remux there is no synch problems. I just want to play the file on the ps3 as a m2ts file. Why isn't it working correctly.

tvconfuse, i've been confused as well :) You say: First demuxed elementary streams with eac3to-as advised. Second remuxed them back into a ts container with TSMuxer-as advised. Untill this step, you say no sync. issues, correct? After cutting ts with h-264 cutter and remuxing back you live issues again. The question is why you don't cut with TSMuxer instead of h264cutter? 3.step: Cut/remux to m2ts with tsmuxer (at the same time).

since i'm interested in taking out the commericals, after i mark my non commerical parts for cutting, should i just mux them to m2ts then join the various m2ts files together in tsmuxer?

No, in this case you have to merge them in eac3to and demux again to merged elementary streams and mux them back with TSMuxer. like: eac3to input.001_m2ts+input.002.m2ts 1: output.h264 2: output.aac

Correct but make sure you don't live any synch. issues with just one m2ts first. So try to get one cut m2ts with the method i stated already: step1 step2 step3. And if everything seems OK with one cut/remuxed m2ts, then go through step4.

well eac3to is giving me an error when i tried to get the audio to come out. I run this eac3to 00001.m2ts+00002.m2ts 1: tv.h264 2: tvsound.aac and get this error M2TS, 1 audio track, 0:15:37 1: AAC, English, 2.0 channels, 126kps, 48khz this audio conversion is not support